LANDLORD GAS SAFETY CERTIFICATES – CHESTER
What documentation can I expect from a gas engineer when they have carried out work in my home?
This will be dependent upon the purpose and type of work carried out. The only documentation required by law is a Landlord Gas Safety Record as there is a legal duty on owners of residential rented properties to have annual safety checks carried out on the gas appliances they provide for their tenants’ use. These safety checks must be carried out by a suitably qualified and registered engineer and the results are recorded in detail on a Landlord Gas Safety Record form with copies provided to the landlord and tenant.
What would you expect to see on a Landlord’s Gas Safety Record?
At a minimum, the record needs to contain:
- A description and location of each appliance/flue checked
- Name, registration number and signature of the engineer who carried out the check
- Date on which the check was carried out
- The address of the property where the appliance/flue is installed
- The name and address of the landlord (or their agent where applicable)
- Any safety defect identified and any action required or taken to rectify it
- Confirmation of the results of the operational safety checks carried out on the appliances.
Landlords also have a legal duty to ensure pipework is in a safe condition, so many proprietary forms also include the facility for the registered engineer to record the results of pipework integrity tests which indicate whether or not the pipework installation is safe.
Not a landlord – what documentation is required?
If you are not a landlord it is always a good idea to confirm with your registered engineer what documentation will be provided before having any gas work done in your home, as there’s no legal requirement for registered engineers to provide any documentation. In most cases your registered engineer will provide you with some documentation as it is good practice to do so.
The level of detail provided on any documentation depends on the type of work undertaken and could vary from a simple job sheet or invoice to a record containing a similar level of detail and information to that provided in a Landlord’s Gas Safety Record. So if you require something specific, make sure you have agreed this with your registered engineer before they start work.
Call us on 01244 360415 to arrange a landlord gas safety check.
- Landlord Gas Safety Certificate Chester
Take a look at some of the frequently asked questions about your legal duties as a landlord.
Landlords’ duties apply to a wide range of accommodation, occupied under a lease or licence, which includes, but not exclusively:
- residential premises provided for rent by local authorities, housing associations, private sector landlords, housing co-operatives, hostels
- rooms let in bed-sit accommodation, private households, bed and breakfast accommodation and hotels
- rented holiday accommodation such as chalets, cottages, flats, caravans and narrow boats on inland waterways.
A landlord has to show that they took all reasonable steps to comply with the law. HSE recommends the following actions and strongly advises that a record be kept of all correspondence with the tenants:
- Leave the tenant a notice stating that an attempt was made to complete the gas safety check and provide your contact details.
- Write to the tenant explaining that a safety check is a legal requirement and that it is for the tenant’s own safety. Give the tenant the opportunity to arrange their own appointment.
- HSE inspectors will look for repeated attempts to complete the gas safety check, including the above suggestions; however the approach will need to be appropriate to each circumstance. It would ultimately be for a court to decide if the action taken was reasonable depending upon the individual circumstances.
In the case of sub-let accommodation, the ‘original’ landlord may retain duties which overlap with those acquired by the person who sub-lets. In these cases, dutyholders need to take effective steps (eg by close co-operation, and clear allocation of responsibilities under contractual arrangements) to ensure requirements are fully met.
However, licensors (ie ‘sub-letters’) of premises who are themselves tenants of those premises are not regarded as landlords in this context and do not have obligations under regulation 36. This means that a tenant allowing others to share accommodation in return for ‘rent’ does not acquire duties under the regulation; these remain with their landlord.
Appliances, fittings and flues in a communal area but which may be used by tenants are also included. You are responsible for the maintenance and repair of flues, appliances and pipework provided for your tenants use; by a Gas Safe registered engineer . Although there is no prescribed timeframe for these duties, good practice would be the demonstration of regular, annual maintenance checks and subsequent repairs.
You are also responsible for ensuring an annual gas safety check is carried out within 12 months of the installation of a new appliance or flue which you provide and annually thereafter by a Gas Safe Registered engineer. You must keep a record of the safety check for 2 years and issue a copy to each existing tenant within 28 days of the check being completed and issue a copy to any new tenants before they move in.
In this situation an agent must arrange maintenance by a Gas Safe registered engineer for all pipework, appliances and flues, which the landlord owns and provides for the tenants use. You must also arrange for an annual gas safety check to be carried out every 12 months by a Gas Safe registered engineer . You must keep a record of the safety check for 2 years and issue a copy to each existing tenant within 28 days of the check being completed and issue a copy to any new tenants before they move in.
There are some good practice measures that you could adopt with appliances that tenants own:
- Send a reminder to the tenant that their appliances should be serviced and checked for safety each year by a Gas Safe registered engineer, and where possible, offer to include these (at reasonable cost) within gas safety maintenance undertaken on your behalf.
- At the start of the tenancy, advise the tenant of any flues or chimneys that are unsuitable for the installation of a gas appliance. You may also wish to consider regulating the installation of any appliance by a tenant through the conditions of the tenancy agreement.
- It is also recommended to include all flues (eg chimneys) connected to gas appliances within your landlord’s gas safety check, even where they do not serve appliances provided by the landlord. This may also help to fulfil other legal duties under the Health and Safety at Work etc. Act 1974.
- Free-standing cookers connected by a flexible connector (bayonet fitting), are not considered to be ‘readily movable’, but can be moved, temporarily, eg to clean the space they normally occupy; this type of activity is not regarded as ‘work’ within the meaning of these Regulations.
- Any other type of installation/reinstallation is regarded as gas work and must be carried out by a Gas Safe registered engineer.
- A gas fire, gas space heater or a gas water heater (including a gas boiler) over 14 kilowatts gross input unless it is room sealed.
- A gas fire, gas space heater, or a gas water heater (including a gas boiler) of 14 kilowatts gross input or less or any instantaneous water heater unless it is room sealed or has an atmosphere-sensing device.
If a room contains one or more of the above appliances and was used as a bedroom prior to 1998 then you will need to do a risk assessment to determine if it can still be used as a bedroom. If you are unsure of the safety of any gas appliance you should get a Gas Safe registered engineer to check it for you.
In addition to maintenance, there are some further safety precautions to take with LPG heaters:
- be aware that cabinet heaters need a good supply of fresh air to burn properly so the room must be well ventilated;
- ensure any heaters have an atmosphere sensing device- it will shut the appliance off if the air quality is poor;
- ensure that the correct size and type of gas bottle is being used.
- be aware that outdoor heaters and not designed for use indoors.
- leave the tenant a notice stating that an attempt was made to complete the gas safety check and provide your contact details;
- write to the tenant explaining that a safety check is a legal requirement and that it is for the tenants own safety. Give the tenant the opportunity to arrange their own appointment;
- HSE inspectors will look for at least three attempts to complete the gas safety check, including the above suggestions; however the approach will need to be appropriate to each circumstance. It would ultimately be for a court to decide if the action taken was reasonable depending upon the individual circumstances.
- It is a good idea to include arrangements for access in the tenancy agreement.
- capable of being reproduced in hard copy format when required (e.g. for the tenant/HSE/housing department)
- secure from loss and interference
- Uniquely identifies the gas operative who carried out the safety check e.g. an electronic signature, a scanned signature, a payroll number unique to the operative, the name of the operative etc; the employer needs to have secure systems that link the individual operative to the unique identifier.
A landlord or gas engineer, with the landlord’s agreement, may send or give a copy of the electronic record directly to the tenant, providing the tenant is happy with this arrangement and has the ability to access it.
The record is a ‘living document’ and landlords should supplement it with records of any follow up action taken (if required). This would provide a full record of the gas safety within the property.
You should not assume that an annual service inspection includes the points required by a safety check; neither should you assume that carrying out an annual gas safety check will be sufficient to provide effective maintenance. The advice of a competent Gas Safe registered engineer should be taken where necessary on action required.
If you suspect there is a gas leak you should immediately do the following:
- Call National Grid’s Gas Emergency Freephone number: 0800 111 999
- Open all the doors and windows
- Shut off the gas supply at the meter control valve (if you know where it is)
On 1 Oct 2015 the Smoke and Carbon Monoxide Alarm (England) Regulations 2015 came into force. From that date, private rented sector landlords have been required to have at least one smoke alarm installed on every floor of their properties and a carbon monoxide alarm in any room where solid fuel is used. After that, the landlord must make sure the alarms are in working order at the start of each new tenancy. The Department for Communities and Local Government has published an explanatory booklet to help landlords to understand and comply with the requirements.
Before you re-let a property after tenants have vacated it, you need to ensure that all appliances and flues are safe and have an up-to-date gas safety check record. A copy of this record needs to be given to tenants prior to moving in.
If you suspect that an appliance could have been tampered with, or there is the possibility of vandalism while a property remains empty, HSE recommends you arrange for another gas safety check to be completed by a Gas Safe registered engineer before giving access to new tenants. When tenants vacate your premises, they may have removed appliances unsafely (eg leaving open-ended pipes, having shut off the emergency control valve), or left their own appliances in place. Landlords should take the opportunity to clarify appliance ownership prior to re-letting.
Appropriate checks should be carried out and any unsafe equipment rectified or removed before a new tenancy begins. It is also recommended that installation pipework be inspected and tested for soundness before property is relet.
Landlords need to take account of any appliance left by a tenant (ie when a lease comes to an end) which the landlord decides to retain in the premises, ensuring that they are included in the annual checks and maintenance arrangements.
- If you suspect there is a gas leak you should immediately do the following:
- Call National Grid’s Gas Emergency Freephone number: 0800 111 999
- Open all the doors and windows
- Shut off the gas supply at the meter control valve (if you know where it is)
It is illegal for anyone to use a gas appliance if they suspect it is unsafe. Turn the appliance off and do not touch it until it has been checked by a Gas Safe registered engineer.
Free leaflets explaining some of the main requirements of landlords, under the Gas Safety (Installation and Use) Regulations 1998 and general gas safety information are available from HSE.
HSE runs a free Gas Safety Advice Line offering advice on gas safety that is open between 9.00am and 5.30 pm Monday to Thursday and 9.00am to 5.00pm on Friday (excluding bank holidays). To contact the Gas Safety Advice Line freephone 0800 300 363.
- an adequate supply of air to help the complete combustion of gas;
- efficient operation of their flue to remove any combustion products, including carbon monoxide (CO), that are produced
Without these safety precautions dangerous levels of carbon monoxide can build up with the possibility of fatal consequences. There are some easy ways to help avoid the build up of carbon monoxide poisoning:
- never block ventilation;
- ensure that flues are kept clear at all times;
- have your appliance regularly maintained and annually serviced by a Gas Safe registered engineer.
- The section on Landlords’ responsibility for gas safety provides further information.
